Alloys of copper and aluminum are known as aluminum bronze, together with other alloying additions produce a range of properties that are beneficial to a diverse range of industries. Of these, the nickel aluminum bronze group may be the most widely used. They have been adapted with time to optimize performance and provide a combination
C95900 Aluminum Bronze is a special aluminum bronze alloy as it contains more than 10% aluminum in the alloy. With between 12 – 13.5% aluminum content C95900 provides a very high strength product with hardness around 286 BHN or Rockwell 29C. C959 is used in applications with heavier loads under abrasive conditions where no impact
Material: C86300 Manganese Bronze with Graphite Plugs Processes: Machining, Drilling, Plugging Bronze Slide Bearing Plates are used for numerous pipeline support systems in applications ranging from Oil & Gas to Industrial systems. Ideal applications are heavy load bearing systems with low velocity of movement. The C863 Manganese Bronze and solid lubricant graphite
That’s right, we’re expanding again here at National Bronze Mfg. Co. This time with the addition of 2 new Amada band saws. This expansion included both vertical and horizontal band saws, with the horizontal band saw equipped with automatic feeding capabilities. The vertical band saw expands our plate sawing capacity and capabilities. The automatic
Polytetrafluoroethylene, is a thermoplastic polymer that was accidentally discovered in 1938. Perhaps best known for its use in coating “non-stick” frying pans, PTFE has a wide range of commercial uses. One such use is as a self-lubricant plug material in cast bronze bushings and wear plates. PTFE is a white solid at room temperature. Plugs
Beryllium copper alloys (BeCu) have been recognized for their potential to provide high strength with good conductivity. C17200 beryllium copper falls into this category with high strength and moderate conductivity, but this alloy also has other attractive properties. C17200 exhibits very low magnetic susceptibility, resists galling, and can be age hardened to yield strengths
Materials: C93200 SAE 660 Bearing Bronze ASTM B505 Processes: Turning, Boring Industry: Mobile Hydraulic Valve This cast bronze bushing is machined from C93200 Bearing Bronze bar stock. This hydraulic valve bronze bushing includes a step on the OD of the bushing as well as a groove to assist in securing the bushing to the
Materials: C63000 Nickel Aluminum Bronze Processes: Grinding, Milling Industry: Agriculture Equipment Axles This nickel aluminum bronze wear plate is machined from a wrought bronze alloy. C63000 nickel aluminum bronze is extruded in rod as well as hot rolled in plate form. The combination of the addition of nickel to the alloy and the
Download our updated line card. Outlining the various products/services/alloys that we supply. The back of the line card also includes a quick reference comparison chart of the various bronze, brass, and copper alloys that we offer. Click here to view our updated line card
Materials: C93200 SAE 660 Bearing Bronze ASTM B505 Processes: Turning, Milling, Tapping Industry: High Pressure Hydraulic Systems This cast bronze grooved guide bushing is machined from C93200 Bearing Bronze bar stock. The bar stock in turned, bored, and tapped to achieve the various features of the finished parts. C932 bronze is an excellent choice for
