local:586.791.2000
Email Us Today!C17510 Beryllium Copper / C17510 Class III
C17510 Beryllium Copper (RWMA Class III)
C17510 Beryllium Copper offers a high performance material that provides a unique combination of relatively high electrical and thermal conductivity and high stregnth. Class III Beryllium Copper is a heat treatable copper alloy with a high tensile stregnth. C17510 is utilized when a combination of very good mechanical stregnth along with moderate electrical and thermal conductivity is required. The hardness properties of C17510 Beryllium Copper are comparable to tool steel.
Shapes
Applications
- Projection Welding Dies
- Seam Welding Wheels
- Electrical Switch Gear
- Relay Parts
- Molds
- Bushings
- Connectors
Specifications
Chemical Composition
(%max., unless shown as range or min.)
(%max., unless shown as range or min.)
| Cu(1) | Al | Be | Co | Fe | Ni | Si | |
| Min./Max. | Rem. | .20 | .2-.6 | .3 | .10 | 1.4-2.2 | .20 |
| Nominal | 97.8 | - | .4 | - | - | 1.8 | - |
Mechanical Properties (measured at room temperature, 68 F (20 C)
| Temper | Section Size |
Cold Work |
Typ/ Min |
Temp | Tensile Strength |
Yield Strength (0.5% ext. under load) |
Yield Strength (0.2% offset) |
El | Rockwell Hardness |
Vickens Hard. |
Brinell Hard. |
||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| in. | % | F | ksi | ksi | ksi | % | B | C | F | 30T | 500 | 500 | 3000 | ||||||
| mm. | C | MPa | MPa | MPa | |||||||||||||||
| Rod | TD04 | 0.0 | 0 | TYP | 68 | 72 | 65 | - | 12 | 68 | - | - | - | - | - | - | |||
| 0.0 | 20 | 496 | 448 | - | 12 | 68 | - | - | - | - | - | - | |||||||
| Forgings | TF00 | 4 | 0 | TYP | 68 | 115 | - | 90 | - | 92 | - | - | - | - | - | - | |||
| 102 | 20 | 794 | - | 620 | - | 92 | - | - | - | - | - | - | |||||||
| Flat Products | TF00 | 0.0 | 0 | TYP | 68 | 110 | 90 | - | 12 | 96 | - | - | 80 | - | - | - | |||
| 0.0 | 20 | 758 | 621 | - | 12 | 96 | - | - | 80 | - | - | - | |||||||
| TD04 | 0.0 | 0 | TYP | 68 | 78 | 70 | - | 5 | 83 | - | - | 72 | - | - | - | ||||
| 0.0 | 20 | 538 | 483 | - | 5 | 83 | - | - | 72 | - | - | - | |||||||
| Rod | TF00 | 0.0 | 0 | TYP | 68 | 110 | 90 | - | 18 | 96 | - | - | - | - | - | - | |||
| 0.0 | 20 | 758 | 621 | - | 18 | 96 | - | - | - | - | - | - | |||||||
| Forgings | TB00 | 0.0 | 0 | TYP | 68 | 42 | - | 20 | - | 50 | - | - | - | - | - | - | |||
| 0.0 | 20 | 293 | - | 138 | - | 50 | - | - | - | - | - | - | |||||||
| Flat Products | TH04 | 0.0 | 0 | TYP | 68 | 115 | 110 | - | 8 | 98 | - | - | 81 | - | - | - | |||
| 0.0 | 20 | 793 | 758 | - | 8 | 98 | - | - | 81 | - | - | - | |||||||
| Rod | TH04 | 0.0 | 0 | TYP | 68 | 115 | 110 | - | 14 | 98 | - | - | - | - | - | - | |||
| 0.0 | 20 | 793 | 758 | - | 14 | 98 | - | - | - | - | - | - | |||||||
| TB00 | 0.0 | 0 | TYP | 68 | 45 | 25 | - | 28 | 35 | - | - | - | - | - | - | ||||
| 0.0 | 20 | 310 | 172 | - | 28 | 35 | - | - | - | - | - | - | |||||||
| Flat Products | TH02 | 0.0 | 0 | TYP | 68 | 115 | 108 | - | 8 | 98 | - | - | 81 | - | - | - | |||
| 0.0 | 20 | 793 | 745 | - | 8 | 98 | - | - | 81 | - | - | - | |||||||
| TD02 | 0.0 | 0 | TYP | 68 | 68 | 60 | - | 8 | 70 | - | - | 64 | - | - | - | ||||
| 0.0 | 20 | 469 | 414 | - | 8 | 70 | - | - | 64 | - | - | - | |||||||
| TB00 | 0.0 | 0 | TYP | 68 | 45 | 25 | - | 28 | 32 | - | - | 36 | - | - | - | ||||
| 0.0 | 20 | 310 | 172 | - | 28 | 32 | - | - | 36 | - | - | - | |||||||
