National Bronze Manufacturing Company
Special Bronze Bushings Standard Bronze Bushings Vehicle Bronze Bushings Sintered Bronze Bushing Bronze Bar, Tube, Plate About National Bronze Contact National Bronze Home Page National Bronze

Sintered Bronze Bushings

Sintered Bronze Bearings
Bronze Bushings and Bar Stock

Also referred to as “Oilite” type Bronze Bushings, these Bronze Powdered Metal (P/M) Bushings are economical in large quantities and are recommended for light to medium duty applications. All Standard Sintered Bronze Bushings are readily available. Sintered Bronze Bar and Tube can be modified for limited quantity runs if your part is not an industry standard size. Typically, bar modification is done to avoid relatively expensive special tooling costs or to improve lead times. When quantities increase, this method becomes impractical and costly. In the case of high quantities, we can produce dedicated tooling to minimize the per piece cost. Please expect 8-12 weeks lead time for tooling and PPAP completion.

Call us to review your needs. Together we can select the most appropriate manufacturing method to balance cost and availability.

Quality Bronze Products
Machining & Service Center
34635 Nova Drive • Clinton Township, MI 48035
Ph: 586-791-2000 • Fax: 586-791-9044
Email: sales@nationalbronze.com
National Bronze
National Bronze Warehouse
3558 Garfield Ave. • Detroit, MI ,48207
Ph: 313-921-2616
Bronze Bushings

Custom Bronze Bearings   | Standard Bronze Bushings | Vehicle Bronze Bushings | Sintered Bronze Bushings
Bronze Bar, Tube, Plate | About Us | Contact Us | Sitemap | Home


Website designed by
Miller Media Inc.

Search engine optimization by RegisterEverywhere.com